dcrd/wire/msginitstate.go
Matheus Degiovani 1869aea8e5 wire: Introduce InitState messages
This adds the GetInitState and InitState messages along with appropriate
tests. It also adds a new protocol version (version 8) and bumps the
current wire version to it.

This set of messages will be used to allow peers to exchange ephemeral
startup information in a more general manner than the current existing
GetMiningState/MiningState pair.

In particular, peers will be able to selectively request only the
specific startup info they're insterested in so that different types of
nodes (such as SPV clients) may only request relevant startup
information.

Compared to the existing MiningState message, the InitState message
already offers a new type of data: tspend hashes, that nodes may use to
fetch tspend transactions for inspecting, generating templates and
voting on their approval.
2020-09-23 14:01:30 -05:00

291 lines
8.6 KiB
Go

// Copyright (c) 2020 The Decred developers
// Use of this source code is governed by an ISC
// license that can be found in the LICENSE file.
package wire
import (
"fmt"
"io"
"github.com/decred/dcrd/chaincfg/chainhash"
)
// MaxISBlocksAtHeadPerMsg is the maximum number of block hashes allowed per
// message.
const MaxISBlocksAtHeadPerMsg = 8
// MaxISVotesAtHeadPerMsg is the maximum number of votes at head per message.
const MaxISVotesAtHeadPerMsg = 40 // 8 * 5
// MaxISTSpendsAtHeadPerMsg is the maximum number of tspends at head per
// message.
const MaxISTSpendsAtHeadPerMsg = 7
// MsgInitState implements the Message interface and represents an initial
// state message. It is used to receive ephemeral startup information from a
// remote peer, such as blocks that can be mined upon, votes for such blocks
// and tspends.
//
// The content of such a message depends upon what the local peer requested
// during a previous GetInitState msg.
type MsgInitState struct {
BlockHashes []chainhash.Hash
VoteHashes []chainhash.Hash
TSpendHashes []chainhash.Hash
}
// AddBlockHash adds a new block hash to the message. Up to
// MaxISBlocksAtHeadPerMsg may be added before this function errors out.
func (msg *MsgInitState) AddBlockHash(hash *chainhash.Hash) error {
const op = "MsgInitState.AddBlockHash"
if len(msg.BlockHashes)+1 > MaxISBlocksAtHeadPerMsg {
msg := fmt.Sprintf("too many block hashes for message [max %v]",
MaxISBlocksAtHeadPerMsg)
return messageError(op, ErrTooManyHeaders, msg)
}
msg.BlockHashes = append(msg.BlockHashes, *hash)
return nil
}
// AddVoteHash adds a new vote hash to the message. Up to
// MaxISVotesAtHeadPerMsg may be added before this function errors out.
func (msg *MsgInitState) AddVoteHash(hash *chainhash.Hash) error {
const op = "MsgInitState.AddVoteHash"
if len(msg.VoteHashes)+1 > MaxISVotesAtHeadPerMsg {
msg := fmt.Sprintf("too many vote hashes for message [max %v]",
MaxISVotesAtHeadPerMsg)
return messageError(op, ErrTooManyVotes, msg)
}
msg.VoteHashes = append(msg.VoteHashes, *hash)
return nil
}
// AddTSpend adds a new tspend hash to the message. Up to
// MaxISTSpendsAtHeadPerMsg may be added before this function errors out.
func (msg *MsgInitState) AddTSpendHash(hash *chainhash.Hash) error {
const op = "MsgInitState.AddTSpendHash"
if len(msg.TSpendHashes)+1 > MaxISTSpendsAtHeadPerMsg {
msg := fmt.Sprintf("too many tspend hashes for message [max %v]",
MaxISTSpendsAtHeadPerMsg)
return messageError(op, ErrTooManyTSpends, msg)
}
msg.TSpendHashes = append(msg.TSpendHashes, *hash)
return nil
}
// BtcDecode decodes r using the protocol encoding into the receiver.
// This is part of the Message interface implementation.
func (msg *MsgInitState) BtcDecode(r io.Reader, pver uint32) error {
const op = "MsgInitState.BtcDecode"
if pver < InitStateVersion {
msg := fmt.Sprintf("%s message invalid for protocol version %d",
msg.Command(), pver)
return messageError(op, ErrMsgInvalidForPVer, msg)
}
// Read num block hashes and limit to max.
count, err := ReadVarInt(r, pver)
if err != nil {
return err
}
if count > MaxISBlocksAtHeadPerMsg {
msg := fmt.Sprintf("too many block hashes for message "+
"[count %v, max %v]", count, MaxISBlocksAtHeadPerMsg)
return messageError(op, ErrTooManyBlocks, msg)
}
msg.BlockHashes = make([]chainhash.Hash, count)
for i := uint64(0); i < count; i++ {
err := readElement(r, &msg.BlockHashes[i])
if err != nil {
return err
}
}
// Read num vote hashes and limit to max.
count, err = ReadVarInt(r, pver)
if err != nil {
return err
}
if count > MaxISVotesAtHeadPerMsg {
msg := fmt.Sprintf("too many vote hashes for message "+
"[count %v, max %v]", count, MaxISVotesAtHeadPerMsg)
return messageError(op, ErrTooManyVotes, msg)
}
msg.VoteHashes = make([]chainhash.Hash, count)
for i := uint64(0); i < count; i++ {
err := readElement(r, &msg.VoteHashes[i])
if err != nil {
return err
}
}
// Read num tspend hashes and limit to max.
count, err = ReadVarInt(r, pver)
if err != nil {
return err
}
if count > MaxISTSpendsAtHeadPerMsg {
msg := fmt.Sprintf("too many tspend hashes for message "+
"[count %v, max %v]", count, MaxISTSpendsAtHeadPerMsg)
return messageError(op, ErrTooManyTSpends, msg)
}
msg.TSpendHashes = make([]chainhash.Hash, count)
for i := uint64(0); i < count; i++ {
err := readElement(r, &msg.TSpendHashes[i])
if err != nil {
return err
}
}
return nil
}
// BtcEncode encodes the receiver to w using the protocol encoding.
// This is part of the Message interface implementation.
func (msg *MsgInitState) BtcEncode(w io.Writer, pver uint32) error {
const op = "MsgInitState.BtcEncode"
if pver < InitStateVersion {
msg := fmt.Sprintf("%s message invalid for protocol version %d",
msg.Command(), pver)
return messageError(op, ErrMsgInvalidForPVer, msg)
}
// Write block hashes.
count := len(msg.BlockHashes)
if count > MaxISBlocksAtHeadPerMsg {
msg := fmt.Sprintf("too many block hashes for message "+
"[count %v, max %v]", count, MaxISBlocksAtHeadPerMsg)
return messageError(op, ErrTooManyBlocks, msg)
}
err := WriteVarInt(w, pver, uint64(count))
if err != nil {
return err
}
for i := range msg.BlockHashes {
err = writeElement(w, &msg.BlockHashes[i])
if err != nil {
return err
}
}
// Write vote hashes.
count = len(msg.VoteHashes)
if count > MaxISVotesAtHeadPerMsg {
msg := fmt.Sprintf("too many vote hashes for message "+
"[count %v, max %v]", count, MaxISVotesAtHeadPerMsg)
return messageError(op, ErrTooManyVotes, msg)
}
err = WriteVarInt(w, pver, uint64(count))
if err != nil {
return err
}
for i := range msg.VoteHashes {
err = writeElement(w, &msg.VoteHashes[i])
if err != nil {
return err
}
}
// Write tspend hashes.
count = len(msg.TSpendHashes)
if count > MaxISTSpendsAtHeadPerMsg {
msg := fmt.Sprintf("too many tspend hashes for message "+
"[count %v, max %v]", count, MaxISTSpendsAtHeadPerMsg)
return messageError(op, ErrTooManyTSpends, msg)
}
err = WriteVarInt(w, pver, uint64(count))
if err != nil {
return err
}
for i := range msg.TSpendHashes {
err = writeElement(w, &msg.TSpendHashes[i])
if err != nil {
return err
}
}
return nil
}
// Command returns the protocol command string for the message. This is part
// of the Message interface implementation.
func (msg *MsgInitState) Command() string {
return CmdInitState
}
// MaxPayloadLength returns the maximum length the payload can be for the
// receiver. This is part of the Message interface implementation.
func (msg *MsgInitState) MaxPayloadLength(pver uint32) uint32 {
if pver < InitStateVersion {
return 0
}
return uint32(VarIntSerializeSize(MaxISBlocksAtHeadPerMsg)) +
(MaxISBlocksAtHeadPerMsg * chainhash.HashSize) +
uint32(VarIntSerializeSize(MaxISVotesAtHeadPerMsg)) +
(MaxISVotesAtHeadPerMsg * chainhash.HashSize) +
uint32(VarIntSerializeSize(MaxISTSpendsAtHeadPerMsg)) +
(MaxISTSpendsAtHeadPerMsg * chainhash.HashSize)
}
// NewMsgInitState returns a new Decred initstate message that conforms to the
// Message interface using the defaults for the fields.
func NewMsgInitState() *MsgInitState {
return &MsgInitState{
BlockHashes: make([]chainhash.Hash, 0, MaxISBlocksAtHeadPerMsg),
VoteHashes: make([]chainhash.Hash, 0, MaxISVotesAtHeadPerMsg),
TSpendHashes: make([]chainhash.Hash, 0, MaxISTSpendsAtHeadPerMsg),
}
}
// NewMsgInitStateFilled returns a new Decred initstate message that conforms
// to the Message interface and fills the message with the provided data. This
// is useful in situations where the data slices are already built as it avoids
// performing a second allocation and data copy.
//
// The provided slices are checked for their maximum length.
func NewMsgInitStateFilled(blockHashes []chainhash.Hash, voteHashes []chainhash.Hash,
tspendHashes []chainhash.Hash) (*MsgInitState, error) {
const op = "NewMsgInitStateFilled"
count := len(blockHashes)
if count > MaxISBlocksAtHeadPerMsg {
msg := fmt.Sprintf("too many block hashes for message "+
"[count %v, max %v]", count, MaxISBlocksAtHeadPerMsg)
return nil, messageError(op, ErrTooManyBlocks, msg)
}
count = len(voteHashes)
if count > MaxISVotesAtHeadPerMsg {
msg := fmt.Sprintf("too many vote hashes for message "+
"[count %v, max %v]", count, MaxISVotesAtHeadPerMsg)
return nil, messageError(op, ErrTooManyVotes, msg)
}
count = len(tspendHashes)
if count > MaxISTSpendsAtHeadPerMsg {
msg := fmt.Sprintf("too many tspend hashes for message "+
"[count %v, max %v]", count, MaxISTSpendsAtHeadPerMsg)
return nil, messageError(op, ErrTooManyTSpends, msg)
}
return &MsgInitState{
BlockHashes: blockHashes,
VoteHashes: voteHashes,
TSpendHashes: tspendHashes,
}, nil
}