This adds the go 1.11 directive to all of the modules in order to
clearly mark they build and work with that version. Go 1.12 modified
the tools such that tidy will automatically add the new version to
modules that do not already have a directive and that would prevent
builds on Go 1.11 through Go 1.11.3 which is not desirable.
As is already well commented in the code, the sequence number parameter
of the CHECKSEQUENCEVERIFY opcode requires 5 bytes instead of the
standard 4 bytes allowed by math opcodes. This introduces a constant
for the value instead of hardcoding 5 to increase readability and
potentially allow the value to be exported in the future.
As is already well commented in the code, the locktime parameter of the
CHECKLOCKTIMEVERIFY opcode requires 5 bytes instead of the standard 4
bytes allowed by math opcodes. This introduces a constant for the value
instead of hardcoding 5 to increase readability and potentially allow
the value to be exported in the future.
This tightens the multisig and pay-to-pubkey standard script
identification functions to use the same strict pubkey requirements as
the consensus rules since standardness rules are generally intended to
be more restrictive than the consensus rules which implies they are at a
minimum at least as restrictive.
The tests are also updated to deal with the additional restriction
accordingly.
This introduces a new error named ErrCheckSigAltVerify and modifies the
opcodeCheckSigAltVerify handler to use the abstractVerify function along
with the new error. This makes the handling consistent with all other
signature checking verification opcode handlers and ensures the error
both can be programmatically detected as well as be uniquely identified
as compared to a generic verify failure.
This renames the flag that indicates whether or not the script engine is
executing a pay-to-script-hash script pair to a name that more
accurately describes its behavior.
An important (and easy for implementations to miss) aspect of the
CHECKSIG opcodes is that the full signature (signature plus hash type)
that is being checked is first removed from the script prior to
calculating the signature hash against which the signature is verified.
It appears the test in the upstream btcsuite code for this was removed
during the initial Decred port instead of being converted as it should
have been.
Consequently, this converts the relevant test so it is correct for
Decred and adds it to the reference tests. Note that the first of the
two added tests is to ensure the original signature is valid prior to
testing the actual removal condition.
This modifies all of the modules, with the exception of the root module,
to remove all replacement directives from their go.mod files and update
the requirements and module sums accordingly.
While it is nice to be able to build and test directly from each module
directory and have it pull in the latest untagged changes when
developing, having all of the overrides in each module makes it
infeasible to use the module tools to help maintain the modules and thus
makes it quite difficult to ensure they are all independently accurate
for external consumers.
By maintaining all of the overrides in the root module and invoking all
builds and tests from it, the overrides will apply to ensure the latest
code is being built and tested.
This also modifies the tests script used with in CI to run all of the
tests from the root module accordingly.
This bumps the various module versions as follows:
- github.com/decred/dcrd/dcrec/secp256k1@v1.0.1
- github.com/decred/dcrd/dcrjson@v1.1.0
- github.com/decred/dcrd/database@v1.0.3
- github.com/decred/dcrd/blockchain/stake@v1.1.0
- github.com/decred/dcrd/mining@v1.1.0
- github.com/decred/dcrd/certgen@v1.0.2
- github.com/decred/dcrd/connmgr@v1.0.2
- github.com/decred/dcrd/mempool@v1.1.0
In addition, it serves as a base for tagging releases of the following
module versions that have previous been bumped since the last release,
but not yet tagged:
- github.com/decred/dcrd/wire@v1.2.0
- github.com/decred/dcrd/chaincfg@v1.2.0
- github.com/decred/dcrd/dcrutil@v1.2.0
- github.com/decred/dcrd/txscript@v1.0.2
- github.com/decred/dcrd/blockchain@v1.1.0
- github.com/decred/dcrd/hdkeychain@v1.1.1
- github.com/decred/dcrd/peer@v1.1.0
- github.com/decred/dcrd/rpcclient@v1.1.0
Finally, it updates all of the dependencies for every module accordingly,
adds a few missing overrides for transitive dependencies, and tidies up
some of the go module sum files.
This modifies the majority of the tests that make use of chain
parameters and the RPC tests to use the resurrected regression test
network.
It also bumps the affected module versions as follows:
- github.com/decred/dcrd/txscript@v1.0.2
- github.com/decred/dcrd/blockchain/stake@v1.0.3
- github.com/decred/dcrd/mempool@v1.0.2
The blockchain and dcrutil modules are also affected, but since their
version has already been bumped since their last release tags, they are
not bumped again.
This bumps the various module versions as follows:
- github.com/decred/dcrd/addrmgr@v1.0.2
- github.com/decred/dcrd/wire@v1.1.0
- github.com/decred/dcrd/chaincfg@v1.1.1
- github.com/decred/dcrd/connmgr@v1.0.1
- github.com/decred/dcrd/dcrutil@v1.1.1
- github.com/decred/dcrd/database@v1.0.1
- github.com/decred/dcrd/hdkeychain@v1.1.0
- github.com/decred/dcrd/txscript@v1.0.1
- github.com/decred/dcrd/blockchain/stake@v1.0.1
- github.com/decred/dcrd/gcs@v1.0.1
- github.com/decred/dcrd/blockchain@v1.0.1
- github.com/decred/dcrd/mining@v1.0.1
- github.com/decred/dcrd/mempool@v1.0.1
- github.com/decred/dcrd/peer@v1.0.1
- github.com/decred/dcrd/rpcclient@v1.0.1
It also updates all of the dependencies for every module accordingly and
adds a few missing overrides for transitive dependencies.
This modifies the test code for several unit tests to prefer using
another network, such as mainnet or simnet, when not specifically
testing something that requires testnet.
In the cases where where testnet is required, it also now prefers a
local reference over directly accessing the testnet parameters directly
from the chaincfg package.
This is being done because the test network undergoes periodic resets
and by reducing the number of direct references, it simplifies the
process of resetting it.
This further refines the modules to add the following new modules
instead of depending on the entire dcrd module:
- github.com/decred/dcrd/dcrjson@v1.0.0
- github.com/decred/dcrd/blockchain@v1.0.0
- github.com/decred/dcrd/blockchain/stake@v1.0.0
- github.com/decred/dcrd/gcs@v1.0.0
- github.com/decred/dcrd/mining@v1.0.0
- github.com/decred/dcrd/mempool@v1.0.0
- github.com/decred/dcrd/peer@v1.0.0
- github.com/decred/dcrd/rpcclient@v1.0.0
Also, it ensures modules that rely on other modules within the repo are
provided replacements to the latest repo code to ensure builds against
master and continuous integration use the latest code.
- github.com/decred/dcrd/addrmgr
- github.com/decred/dcrd/blockchain
- github.com/decred/dcrd/blockchain/stake
- github.com/decred/dcrd/chaincfg
- github.com/decred/dcrd/connmgr
- github.com/decred/dcrd/database
- github.com/decred/dcrd/dcrec/secp256k1
- github.com/decred/dcrd/dcrjson
- github.com/decred/dcrd/dcrutil
- github.com/decred/dcrd/gcs
- github.com/decred/dcrd/hdkeychain
- github.com/decred/dcrd/mempool
- github.com/decred/dcrd/mining
- github.com/decred/dcrd/peer
- github.com/decred/dcrd/rpcclient
- github.com/decred/dcrd/txscript
- github.com/decred/dcrd/wire
Now that the chaincfg, chainhash, dcrec, edwards, secp256k1, dcrutil,
wire, and slog modules have been defined, update the txscript module to
only depend on them instead of the entire dcrd module.
This removes the unused curve parameter from the ParseSignature and
ParseDERSignature functions of the secp256k1 package and updates all
callers in the repository accordingly.
This modifies the PeekInt function of the stack to accept a maximum
script number length to mirror PopInt for consistency. It also updates
the two callers CLTV and CSV) which were manually performing the same
task with 5 bytes due to PeekInt enforcing 4-byte script nums to use the
modified version accordingly.
It also adds some stack tests for 5-byte encodings on both PopInt and
PeekInt.
This removes the flag to require minimal encoding when create script
numbers since since all callers now call the function with true due to
the recent removal of the minimal data script verification flag from the
script engine and updates the tests accordingly.
This removes the MINIMALDATA script verify flag from the various
reference test data since it is now a noop due to the corresponding flag
being removed from the script engine.
This removes the ScriptVerifyMinimalData flag from the txscript package,
changes the default semantics to always enforce its behavior, and
updates all callers in the repository accordingly.
This change is being made to simplify the script engine code since the
flag has always been active and required by consensus in Decred, so
there is no need to require a flag to conditionally toggle it.
It should be noted that the tests removed from script_tests.json
specifically dealt with ensuring equivalency of different ways to encode
the same numbers when the ScriptVerifyMinimalData flag is not set.
Therefore, they are no longer necessary.
A few tests which dealt with equivalency that did not already have
expected failing counterparts were converted to expected failure.
Also, several of the tests which dealt with ensuring the specific
encoding of numeric opcodes is being used have been converted to use
hashes since the minimal data requirements specifically prevent
alternate ways of pushing the same encoding which is necessary for
directly checking equality of the raw bytes.
Finally, the MINIMALDATA indicator to enable the flag in the test data
has been retained for now in order to isolate the logic changes as much
as possible.
This removes the DERSIG script verify flag from the various reference
test data since it is now a noop due to the corresponding flag being
removed from the script engine.
This removes the ScriptVerifyDERSignatures flag from the txscript
package, changes the default semantics to always enforce its behavior
and updates all callers in the repository accordingly.
This change is being made to simplify the script engine code since the
flag has always been active and required by consensus in Decred, so
there is no need to require a flag to conditionally toggle it.
It should be noted that the tests removed from script_tests.json
specifically dealt with ensuring non-DER-compliant signatures were
handled properly when the ScriptVerifyDERSignatures flag was not set.
Therefore, they are no longer necessary.
Finally, the DERSIG indicator to enable the flag in the test data has
been retained for now in order to keep the logic changes separate.
This removes the P2SH script verify flag from the various reference test
data since it is now a noop due to the corresponding flag being removed
from the script engine.
This removes the ScriptBip16 flag from the txscript package, changes the
default semantics to always enforce its behavior, and updates all
callers in the repository accordingly.
This change is being made to simplify the script engine code since the
flag has always been active and required by consensus in Decred, so there is
no need to require a flag to conditionally toggle it.
Also, since it is no longer possible to invoke the script engine without
the flag with the clean stack flag, it removes the now unused
ErrInvalidFlags error and associated tests.
It should be noted that the test removed from script_tests.json
specifically dealt with ensuring a signature script that contained
non-data-pushing opcodes was successful when neither the ScriptBip16 or
ScriptVerifySigPushOnly flags were set. Therefore, it is no longer
necessary.
Finally, the P2SH indicator to enable the flag in the test data has been
retained for now in order to keep the logic changes separate.
This updates the data driven transaction script tests to combine the
previously separate valid and invalid test data files into a single file
and adds a field for the expected result. This is a nice improvement
since it means tests can now ensure script failures are due to a
specific expected reason as opposed to only generically detecting
failure as the previous format required.
Since it is possible that the script engine might return more fine
grained errors than that test data expects, the test adapter handles
this by allowing expected errors in the test data to be mapped to
multiple txscript errors.
While performing the conversion, it also adds several tests for the
following areas:
- The test harness itself to ensure the parsing logic, particularly for
the recently added repetition syntax, is working as intended
- All of the opcodes which were converted to NOPs in Decred
to ensure they are also discouraged from use
- All of the reserved opcodes in Decred
This converts the majority of script errors from generic errors created
via errors.New and fmt.Errorf to use a concrete type that implements the
error interface with an error code and description.
This allows callers to programmatically detect the type of error via
type assertions and an error code while still allowing the errors to
provide more context.
For example, instead of just having an error the reads "disabled opcode"
as would happen prior to these changes when a disabled opcode is
encountered, the error will now read "attempt to execute disabled opcode
OP_FOO".
While it was previously possible to programmatically detect many errors
due to them being exported, they provided no additional context and
there were also various instances that were just returning errors
created on the spot which callers could not reliably detect without
resorting to looking at the actual error message, which is nearly always
bad practice.
Also, while here, export the MaxStackSize and MaxScriptSize constants
since they can be useful for consumers of the package and perform some
minor cleanup of some of the tests.
This slightly cleans up the handling for pay-to-script-hash scripts and
related stake opcode checking as follows:
- Move the isScriptHash and isAnyKindOfScriptHash functions to script.go
since they are required by consensus and therefore do not belong in
standard.go which is reserved for standardness only rules
- Introduce a new function named isStakeOpcode and use it throughout
versus repeating the specific logic in multiple places
- Use the stake opcode constants instead of magic numbers in the
aforementioned new function
- Introduce a new function named isStakeScriptHash which specifically
determines if a script is of the special stake p2sh form
- Update isAnyKindOfScriptHash to make use of the original isScriptHash
function instead of repeating the logic and the newly introduced
isStakeScriptHash function
This cleans up the code for handling the checksig and checkmultisig
opcodes to explicitly call out any semantics that are likely not
obvious, correct some comments, and improve readability.
It also adds several tests to the reference script tests which exercise
the semantics of the check[multi]sig opcodes including both positive and
negative tests.
Finally, it corrects nearly all of the negative tests related to
signature checking of the script tests which were not properly updated
for the differences introduced by Decred so that they fail for the
intended reasons.
The malformed signatures in the tests were very carefully crafted to be
valid except for the very specific condition being tested. The majority
of the negative tests modified and added can be manually verified by
commenting out the relevant checks in the script engine, although a few
of them will pass because they fail for other reasons. In those cases,
prints can be added to ensure the expected failure path is being hit.
This removes the STRICTENC script verify flag from the various test data
since it is now a noop due to the corresponding flag being removed from
the script engine.
This removes the ScriptVerifyStrictEncoding flag from the txscript
package, changes the default semantics to always enforce its behavior
and updates all callers in the repository accordingly.
This change is being made to simplify the script engine code since the
flag has always been active and required by consensus in Decred, so
there is no need to require a flag to conditionally toggle it.
It should be noted that the tests removed from script_valid.json
specifically dealt with ensuring signatures not compliant with DER
encoding did not cause execution to halt early on invalid signatures
when neither of the ScriptVerifyStrictEncoding or
ScriptVerifyDERSignatures flags were set. Therefore, they are no longer
necessary.
For nearly the same reason, the tx test related to the empty pubkey
tx_valid.json was moved to tx_invalid.json. In particular, an empty
pubkey without ScriptVerifyStrictEncoding simply failed the signature
check and continued execution, while the same condition with the flag
halts execution. Thus, without the flag the final NOT in the script
would allow the script to succeed, while it does not under the strict
encoding rules.
Finally, the STRICTENC indicator to enable the flag in the test data has
been retained for now in order to keep the logic changes separate.
