Prepare for new release
This commit is contained in:
Peter D. Gray
parent
ec246e292f
commit
cf4f826c35
@ -4,69 +4,49 @@ This lists the changes in the most recent firmware, for each hardware platform.
|
||||
|
||||
# Shared Improvements - Both Mk4 and Q
|
||||
|
||||
**5.3.1 (Mk4) and 1.2.1Q is a hotfix to address multisig signing issue. No functional changes.**
|
||||
|
||||
- _Important Bugfix_: Already imported multisig wallets would show errors when signing. This
|
||||
was caused by our internal change in key path notation from `84'` (prime) to `84h` (hardened).
|
||||
- Enhancement: Add `Nunchuk` and `Zeus` options to `Export Wallet`
|
||||
- Enhancement: `View Identity` shows temporary seed active at the top
|
||||
- Enhancement: Can specify start index for address explorer export and browsing
|
||||
- Enhancement: Allow unlimited index for BIP-85 derivations. Must be enabled first in `Danger Zone`
|
||||
- Change: `Passphrase` menu item is no longer offered if BIP39 passphrase
|
||||
already in use. Use `Restore Master` with ability to keep or purge current
|
||||
passphrase wallet settings.
|
||||
- Change: Removed ability to add passphrase to master seed if active temporary seed.
|
||||
- Change: Wipe LFS during `Lock Down Seed` and `Destroy Seed`
|
||||
- Bugfix: Do not allow non-ascii or ascii non-printable characters in multisig wallet name
|
||||
- Bugfix: `Brick Me` option for `If Wrong` PIN caused yikes.
|
||||
- Bugfix: Properly handle and finalize framing error response in USB protocol.
|
||||
- Bugfix: Handle ZeroSecretException for BIP39 passphrase calculation when on temporary
|
||||
seed without master secret
|
||||
- Bugfix: Saving passphrase on SD Card caused a freeze that required reboot
|
||||
- Bugfix: Properly verify signed armored message with regtest address
|
||||
- Bugfix: Create ownership file when generating addresses export CSV
|
||||
- Recovery SD Card image building moved into its own repo:
|
||||
[github.com/Coldcard/recovery-images](https://github.com/Coldcard/recovery-images)
|
||||
- Bugfix: Reload trick pins before checking for active duress wallet.
|
||||
|
||||
- New Feature: PushTX: once enabled with a service provider's URL, you can tap the COLDCARD
|
||||
and your phone will open a webpage that transmits your freshly-signed transaction onto
|
||||
the blockchain. See `Settings > NFC Push Tx` to enable and select service provider, or your
|
||||
own webpage. More at <https://pushtx.org>. You can also use this to broadcast any
|
||||
transaction found on the MicroSD card (See `Tools > NFC Tools > Push Transaction`).
|
||||
- New Feature: Transaction Output Explorer: allows viewing all output details for
|
||||
larger txn (10+ output, 20+ change) before signing. Offered for large transactions only
|
||||
because we are already showing all the details for typical transactions.
|
||||
- New Feature: Setting to enable always showing XFP as first item in home menu.
|
||||
- Enhancement: When signing, show sum of outgoing value at top. Always show number
|
||||
of inputs/outputs and total change value.
|
||||
- Enhancement: Add `Sign PSBT` shortcut to `NFC Tools` menu
|
||||
- Enhancement: Stricter p2sh-p2wpkh validation checks.
|
||||
- Enhancement: Show master XFP of BIP-85 derived wallet in story before activation. Only
|
||||
words and extended private key cases.
|
||||
- Enhancement: Add `Theya` option to `Export Wallet`
|
||||
- Enhancement: Mention the need to remove old duress wallets before locking down temporary seed.
|
||||
- Bugfix: Fix PSBTv2 `PSBT_GLOBAL_TX_MODIFIABLE` parsing.
|
||||
- Bugfix: Decrypting Tapsigner backup failed even for correct key.
|
||||
- Bugfix: Clear any pending keystrokes before PSBT approval screen.
|
||||
- Bugfix: Display max 20 change outputs in when signing, and max 10 of largest outputs, and
|
||||
offer the Transaction Output Explorer if more to be seen.
|
||||
- Bugfix: Calculate progress bar correctly in Address Explorer after first page.
|
||||
- Bugfix: Search also Wrapped Segwit single sig addresses if P2SH address provided, not just
|
||||
multisig (multisig has precedence for P2SH addresses)
|
||||
- Bugfix: Address search would not find addresses for non-zero account numbers that had
|
||||
been exported but not yet seen in a PSBT.
|
||||
|
||||
# Mk4 Specific Changes
|
||||
|
||||
## 5.3.1 - 2024-05-09
|
||||
## 5.3.2 - 2024-06-26
|
||||
|
||||
- Bugfix: Displaying change address in Address Explorer fails if NFC and Vdisk not enabled.
|
||||
|
||||
- Enhancement: When providing 12 or 18 word seed phrase, valid final word choices
|
||||
are presented in a new menu.
|
||||
- Enhancement: Move dice rolls (for generating master seed) to `Advanced` submenu.
|
||||
- Enhancement: Using "Verify Address" in NFC Tools menu, allows entry of a payment address
|
||||
and reports if it is part of a wallet this Coldcard knows the key for. Includes Multisig
|
||||
and single sig wallets.
|
||||
- searches up to the first 1528 addresses (external and change addresses)
|
||||
- stores data as it goes to accelerate future uses
|
||||
- worst case, it can take up to 2 minutes to rule out an address, but after that it is fast!
|
||||
- Bugfix: Constant `AFC_BECH32M` incorrectly set `AFC_WRAPPED` and `AFC_BECH32`.
|
||||
- Bugfix: Fix inability to activate Duress Wallet as temporary seed when master seed is 12 words.
|
||||
- Bugfix: Yikes when using BIP39 passphrase with temporary seed without master seed set.
|
||||
- Bugfix: v1 and v2 QRs too small and not readable (fixed)
|
||||
- Bugfix: Show indexes for full range of addresses we are able to generate during QR display.
|
||||
- Tweak: Force default HW settings (USB,NFC,VDisk OFF) after clone/backup is restored.
|
||||
- Tweak: Cleanup in NFC code: repeated messages, "Unable to find data expectd in NDEF", removed.
|
||||
- Tweak: Function button change from (6) to (0) to view change addresses in `Address Explorer`
|
||||
- Tweak: Function button change from (2) to (0) to switch to derived secret in `Derive Seed B85`
|
||||
- Bootrom version bump: 3.2.0 released with no functional changes except those shared with Q.
|
||||
|
||||
# Q Specific Changes
|
||||
|
||||
## 1.2.1Q - 2024-05-09
|
||||
## 1.2.2Q - 2024-06-26
|
||||
|
||||
- Enhancement: Allow export of multisig XPUBs via BBQr
|
||||
- Enhancement: Import multisig via QR/BBQr - both legacy COLDCARD export and descriptors supported
|
||||
- Enhancement: Status bar text is sharper now
|
||||
- Enhancement: Added ability to write signed PSBT/txn to lower (B) SD slot when both cards inserted
|
||||
- Bugfix: Fullscreen display of v23 and v24 QRs were too dense and hard to read
|
||||
- Bugfix: Battery idle timeout also considers last progress bar update
|
||||
- Bugfix: Allow `Send Password` (keystrokes) of capital letters of alphabet
|
||||
- Bugfix: Pressing SYM+SHIFT was toggling CAPS continuously. Now toggles once only
|
||||
- Bugfix: Restrict keys that can be pressed during seed entry after final word inserted
|
||||
- Enhancement: Coldcard multisg export/import format detected in `Scan Any QR Code`.
|
||||
- Enhancement: Support newer-version QR scanner modules.
|
||||
- Bugfix: Exporting BIP-85 derived entropy via NFC was offered even when NFC disabled,
|
||||
leading to a Yikes error.
|
||||
|
||||
|
||||
# Release History
|
||||
|
||||
@ -1,5 +1,50 @@
|
||||
*See ChangeLog.md for more recent changes, these are historic versions*
|
||||
|
||||
## 5.3.1 - 2024-05-09
|
||||
|
||||
- _Important Bugfix_: Already imported multisig wallets would show errors when signing. This
|
||||
was caused by our internal change in key path notation from `84'` (prime) to `84h` (hardened).
|
||||
- Enhancement: Add `Nunchuk` and `Zeus` options to `Export Wallet`
|
||||
- Enhancement: `View Identity` shows temporary seed active at the top
|
||||
- Enhancement: Can specify start index for address explorer export and browsing
|
||||
- Enhancement: Allow unlimited index for BIP-85 derivations. Must be enabled first in `Danger Zone`
|
||||
- Change: `Passphrase` menu item is no longer offered if BIP39 passphrase
|
||||
already in use. Use `Restore Master` with ability to keep or purge current
|
||||
passphrase wallet settings.
|
||||
- Change: Removed ability to add passphrase to master seed if active temporary seed.
|
||||
- Change: Wipe LFS during `Lock Down Seed` and `Destroy Seed`
|
||||
- Bugfix: Do not allow non-ascii or ascii non-printable characters in multisig wallet name
|
||||
- Bugfix: `Brick Me` option for `If Wrong` PIN caused yikes.
|
||||
- Bugfix: Properly handle and finalize framing error response in USB protocol.
|
||||
- Bugfix: Handle ZeroSecretException for BIP39 passphrase calculation when on temporary
|
||||
seed without master secret
|
||||
- Bugfix: Saving passphrase on SD Card caused a freeze that required reboot
|
||||
- Bugfix: Properly verify signed armored message with regtest address
|
||||
- Bugfix: Create ownership file when generating addresses export CSV
|
||||
- Recovery SD Card image building moved into its own repo:
|
||||
[github.com/Coldcard/recovery-images](https://github.com/Coldcard/recovery-images)
|
||||
- Bugfix: Reload trick pins before checking for active duress wallet.
|
||||
|
||||
- Enhancement: When providing 12 or 18 word seed phrase, valid final word choices
|
||||
are presented in a new menu.
|
||||
- Enhancement: Move dice rolls (for generating master seed) to `Advanced` submenu.
|
||||
- Enhancement: Using "Verify Address" in NFC Tools menu, allows entry of a payment address
|
||||
and reports if it is part of a wallet this Coldcard knows the key for. Includes Multisig
|
||||
and single sig wallets.
|
||||
- searches up to the first 1528 addresses (external and change addresses)
|
||||
- stores data as it goes to accelerate future uses
|
||||
- worst case, it can take up to 2 minutes to rule out an address, but after that it is fast!
|
||||
- Bugfix: Constant `AFC_BECH32M` incorrectly set `AFC_WRAPPED` and `AFC_BECH32`.
|
||||
- Bugfix: Fix inability to activate Duress Wallet as temporary seed when master seed is 12 words.
|
||||
- Bugfix: Yikes when using BIP39 passphrase with temporary seed without master seed set.
|
||||
- Bugfix: v1 and v2 QRs too small and not readable (fixed)
|
||||
- Bugfix: Show indexes for full range of addresses we are able to generate during QR display.
|
||||
- Tweak: Force default HW settings (USB,NFC,VDisk OFF) after clone/backup is restored.
|
||||
- Tweak: Cleanup in NFC code: repeated messages, "Unable to find data expectd in NDEF", removed.
|
||||
- Tweak: Function button change from (6) to (0) to view change addresses in `Address Explorer`
|
||||
- Tweak: Function button change from (2) to (0) to switch to derived secret in `Derive Seed B85`
|
||||
- Bootrom version bump: 3.2.0 released with no functional changes except those shared with Q.
|
||||
|
||||
## 5.2.2 - 2023-12-21
|
||||
|
||||
- Bugfix: Re-enable `Lock Down Seed` feature which was disabled by accident
|
||||
|
||||
@ -1,5 +1,40 @@
|
||||
*See ChangeLog.md for more recent changes, these are historic versions*
|
||||
|
||||
## 1.2.1Q - 2024-05-09
|
||||
|
||||
- _Important Bugfix_: Already imported multisig wallets would show errors when signing. This
|
||||
was caused by our internal change in key path notation from `84'` (prime) to `84h` (hardened).
|
||||
- Enhancement: Add `Nunchuk` and `Zeus` options to `Export Wallet`
|
||||
- Enhancement: `View Identity` shows temporary seed active at the top
|
||||
- Enhancement: Can specify start index for address explorer export and browsing
|
||||
- Enhancement: Allow unlimited index for BIP-85 derivations. Must be enabled first in `Danger Zone`
|
||||
- Change: `Passphrase` menu item is no longer offered if BIP39 passphrase
|
||||
already in use. Use `Restore Master` with ability to keep or purge current
|
||||
passphrase wallet settings.
|
||||
- Change: Removed ability to add passphrase to master seed if active temporary seed.
|
||||
- Change: Wipe LFS during `Lock Down Seed` and `Destroy Seed`
|
||||
- Bugfix: Do not allow non-ascii or ascii non-printable characters in multisig wallet name
|
||||
- Bugfix: `Brick Me` option for `If Wrong` PIN caused yikes.
|
||||
- Bugfix: Properly handle and finalize framing error response in USB protocol.
|
||||
- Bugfix: Handle ZeroSecretException for BIP39 passphrase calculation when on temporary
|
||||
seed without master secret
|
||||
- Bugfix: Saving passphrase on SD Card caused a freeze that required reboot
|
||||
- Bugfix: Properly verify signed armored message with regtest address
|
||||
- Bugfix: Create ownership file when generating addresses export CSV
|
||||
- Recovery SD Card image building moved into its own repo:
|
||||
[github.com/Coldcard/recovery-images](https://github.com/Coldcard/recovery-images)
|
||||
- Bugfix: Reload trick pins before checking for active duress wallet.
|
||||
|
||||
- Enhancement: Allow export of multisig XPUBs via BBQr
|
||||
- Enhancement: Import multisig via QR/BBQr - both legacy COLDCARD export and descriptors supported
|
||||
- Enhancement: Status bar text is sharper now
|
||||
- Enhancement: Added ability to write signed PSBT/txn to lower (B) SD slot when both cards inserted
|
||||
- Bugfix: Fullscreen display of v23 and v24 QRs were too dense and hard to read
|
||||
- Bugfix: Battery idle timeout also considers last progress bar update
|
||||
- Bugfix: Allow `Send Password` (keystrokes) of capital letters of alphabet
|
||||
- Bugfix: Pressing SYM+SHIFT was toggling CAPS continuously. Now toggles once only
|
||||
- Bugfix: Restrict keys that can be pressed during seed entry after final word inserted
|
||||
|
||||
## 1.1.0Q - 2024-04-02
|
||||
|
||||
- Enhancement: Scan any QR and report if it is part of a wallet this Coldcard knows
|
||||
|
||||
@ -4,49 +4,20 @@ This lists the new changes that have not yet been published in a normal release.
|
||||
|
||||
# Shared Improvements - Both Mk4 and Q
|
||||
|
||||
- New Feature: PushTX: once enabled with a service provider's URL, you can tap the COLDCARD
|
||||
and your phone will open a webpage that transmits your freshly-signed transaction onto
|
||||
the blockchain. See `Settings > NFC Push Tx` to enable and select service provider, or your
|
||||
own webpage. More at <https://pushtx.org>. You can also use this to broadcast on any
|
||||
transaction on the MicroSD card (See `Tools > NFC Tools > Push Transaction`)
|
||||
- New Feature: Transaction Output Explorer: allows viewing all output details for
|
||||
larger txn (10+ output, 20+ change) before signing. Offered for large transactions only
|
||||
because we are already showing all the details for typical transactions.
|
||||
- New Feature: New setting to enable always showing XFP as first item in home menu.
|
||||
- Enhancement: When signing, show sum of outgoing value at top. Always show number
|
||||
of inputs/outputs and total of change value.
|
||||
- Enhancement: Add `Sign PSBT` shortcut to `NFC Tools` menu
|
||||
- Enhancement: Stricter p2sh-p2wpkh validation checks.
|
||||
- Enhancement: Show master XFP of BIP-85 derived wallet in story before activation. Only
|
||||
words and extended private keys.
|
||||
- Enhancement: Add `Theya` option to `Export Wallet`
|
||||
- Enhancement: Mention the need to remove old duress wallets before locking down temporary seed.
|
||||
- Bugfix: Display max 20 change outputs in when signing. Offer Transaction Output Explorer if more.
|
||||
- Bugfix: Fix PSBTv2 `PSBT_GLOBAL_TX_MODIFIABLE` parsing.
|
||||
- Bugfix: Decrypting Tapsigner backup failed even for correct key.
|
||||
- Bugfix: Clear any pending keystrokes before PSBT approval screen.
|
||||
- Bugfix: UX shows only 10 outputs with the biggest value on screen, other values available
|
||||
after a keypress.
|
||||
- Bugfix: Calculate progress bar correctly in Address Explorer after first page.
|
||||
- Bugfix: Search also Wrapped Segwit single sig addresses if P2SH address provided, not just
|
||||
multisig (multisig has precedence for P2SH addresses)
|
||||
- Bugfix: Address search would not find addresses for non-zero account numbers that had
|
||||
been exported but not yet seen in a PSBT.
|
||||
- tbd
|
||||
|
||||
|
||||
# Mk4 Specific Changes
|
||||
|
||||
## 5.3.2 - 2024-06-XX
|
||||
## 5.3.3 - 2024-08-XX
|
||||
|
||||
- Bugfix: Displaying change address in Address Explorer fails if NFC and Vdisk not enabled.
|
||||
- tbd
|
||||
|
||||
|
||||
# Q Specific Changes
|
||||
|
||||
## 1.2.2Q - 2024-06-XX
|
||||
## 1.2.3Q - 2024-08-XX
|
||||
|
||||
- Enhancement: Coldcard multisg export/import format detected in `Scan Any QR Code`.
|
||||
- Enhancement: Support newer-version QR scanner modules.
|
||||
- Bugfix: Exporting BIP-85 derived entropy via NFC was offered even when NFC disabled,
|
||||
leading to a Yikes error.
|
||||
- tbd
|
||||
|
||||
|
||||
|
||||
Loading…
Reference in New Issue
Block a user